Emtek Keypad Deadbolt Locksets Bedienungsanleitung

Installation & Programming GuideKeypad Deadbolt LocksetsASSA ABLOY, the global leader in door opening solutions

10How to ProgramProgramming Your LockIn order to perform each of the following six functions, the lock must rst be placed in Programming Mode:*If no

11IN8-KEYPADDB1 09/27/2010Restoring the Lock to Factory Default Setting• Remove power (disconnect 9V battery) from Lock • Press and Hold EMTEK butto

ASSA ABLOY is the global leader in door opening solutions, dedicated to satisfying end-user needs for security, safety and convenience.Copyright © 201

24c4d23665189744b4aITEM NO. DESCRIPTION QTY.1 Key 22 Outside Trim Plate Assembly 13 Deadbolt Latch Assembly 2 ⁄” or 2 ¾” Backset 14 Inside Trim Plat

3Step 1: Fasten Security Plate using two #10 x 3” Wood Screws (item #9). Step 2: Fasten Strike Plate using two #8 x ¾” Wood Screws (item #6).2 ⁄”

4Fasten Latch using two #8 x ¾” Wood Screws (item #6).2. Remove Screws from Inside Trim Plate1. Install LatchHow to Install!REMOVE INSIDE CHASSIS FROM

53. Install Outside Trim Plate Assembly4. Install Inside ChassisPosition the Outside Trim Plate Assembly through the bore hole.!Flat Shaft through lat

64. Install Inside ChassisStep 2: Feed the Wire Harness through Inside Chassis.Step 3: Fasten Inside Chassis using two #8-32 x 1½” Flat Head Machine

7Step 4: Connect Wire Harness (A) and tuck Connectors as shown (B).ABStep 5: Install Battery.For optimal performance, always use a good quality bat

8*Unlocked position is required for installation and removal of the Inside Trim Plate Assembly.*UnlockedCorrect for installationLockedIncorrect for i

9Your Emtek lock is shipped with two 4-digit user codes and one 6-digit programming code. These codes are randomly generated at the factory. (Turn to